Products


Clear All

Selected Filters:


  • A/D Firefilm III

    Features:

    • UL/ULC, ITS and ICC-ES Listed – designs for many types of steel sections. Up to 3 hour fire ratings for both interior general purpose and interior conditioned space applications.
    • Decorative Finish – Gives a smooth, decorative finish. Compatible topcoats available in a wide range of colors.
    • Advanced fiber free formulation - dust free surface.
    • Durable finish – Provides a hard, impact and abrasion resistant surface.
    • Topcoat finishes smooth to slight orange peel.
    • Thin film coating – space saving smaller column footprints.
    • Low VOC content.
    • LEED compliant

    Description:

    A/D Firefilm III is a decorative, fiber free, thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes.


  • A/D Firefilm III C

    Features:

    • UL/ULC and ITS Listed – designs for many types of steel sections. Up to 3 hour fire ratings for both interior general purpose and interior conditioned space applications.
    • Decorative Finish – Gives a smooth, decorative finish. Compatible topcoats available in a wide range of colors.
    • Advanced fiber free formulation - dust free surface.
    • Durable finish – Provides a hard, impact and abrasion resistant surface.
    • Topcoat finishes smooth to slight orange peel.
    • Thin film coating – space saving smaller column footprints.
    • Low VOC content.
    • LEED compliant.
    • Extensive outgas testing for controlled cleanroom and sterile environments.

    Description:

    A/D Firefilm® III C is a decorative, fiber free, thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes in clean room and sterile environments.


  • Additive 101

    Features:

    • Additive 101 accelerates polyurethane cure rates and shortens dry film formation time within a wide range of application temperatures. In general, dry times can be decreased from 25-40% depending on the ambient conditions and substrate temperature. With the use of Additive 101, select Carboline 133 & 134 series polyurethanes will continue to cure at temperatures as low as 20°F (-7°C). Refer to specific product cure times for guidance.

    Description:

    Additive 101 is an accelerator used to speed the cure of many solvent-based polyurethane coatings. It can be used in Carboline’s Carbothane Series finishes including the 133 and 134 Series products and Clear Coats. DO NOT USE with water-borne polyurethanes.


  • Additive 47

    Features:

    Description:

    Styrene


  • Additive 8505

    Features:

    • Additive 8505 accelerates atmospheric epoxy cure rates and shortens dry film formation time with a wide range of application temperatures. In general, dry times can be decreased from 25-40%, depending on the ambient conditions and substrate temperature. With the use of Additive 8505, select Carboguard products intended for atmospheric/non-immersion service will continue to cure at temperatures as low as 35 °F (2 °C); applicators shall be aware its use will also shorten pot life times by 40- 50%. Refer to product instructions and cure times for guidance.

    Description:

    Additive 8505 is an accelerator used to speed the cure of select atmospheric epoxies.


  • Additive 8506

    Features:

    Description:

    Epoxy accelerator


  • Additive 8509

    Features:

    Description:

    Urethane accelerator


  • Bitumastic 300 LH

    Features:

    • Excellent chemical, corrosion and abrasion resistance
    • High-build, 16-24 mils (400-610 microns) in a single coat (up to 35 mils with force curing)
    • Compatible with controlled cathodic protection
    • Suitable for use in exposures as referenced in the following specifications*: Corp of Engineers C-200, C200a AWWA C-210 for exterior
    • SSPC-Paint 16

    Description:

    Bitumastic 300 LH is a “low-HAPS” version of the renowned high build coal tar epoxy (300M) used for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.


  • Bitumastic 300 M

    Features:

    • Excellent chemical, corrosion and abrasion resistance
    • High-build, 16-24 mils (400-610 microns) in a single coat (up to 35 mils with force curing)
    • Compatible with controlled cathodic protection
    • Suitable for use in exposures as referenced in the following specifications:
    • Corp of Engineers C-200, C200a
    • AWWA C-210 for exterior
    • SSPC-Paint 16
    • Steel Tank Institute Corrosion Control System STI-P3
    • Approved MPI #35

    Description:

    Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.


  • Bitumastic 300 M COE

    Features:

    • Excellent chemical, corrosion and abrasion resistance
    • High-build, 12-14 mils (300-350 microns) in a single coat
    • Compatible with controlled cathodic protection
    • Meets Corps of Engineers C200, C200a specification
    • Suitable for use in exposures as referenced in the following specifications: SSPC-Paint 16 & Steel Tank Institute Corrosion Control System STI-P3

    Description:

    Renowned high build coal tar epoxy for protection for steel and concrete in single or two-coat applications developed specifically for the Corps of Engineers (COE).